Sulfate

Inorganic Anions by Ion Chromatography (By EPA 300.0) 

Scope:

The test method covers the determination of common inorganic anions in drinking water, surface water, mixed domestic and industrial wastewaters, groundwater, reagent waters, solids (after extraction), leachates (when no acetic acid is used). 

A small volume of sample, typically 50-100 uL, is introduced into an ion chromatograph. The anions of interest are separated and measured, using a system comprised of a guard column, separator column, suppressor device, and conductivity detector.

Method Data

Method 300.0
Hold TimePart A: 48 Hours (NO2-N, NO3-N, orthophosphate-P) 28 days (others) Part B: Bromate and Chlorate (28 days) and chlorite (14 days with preservation -- otherwise analyze immediately).
PreservationPart A: No preservation is required for bromide, chloride, or fluoride. Refrigerate samples at 4 degrees C for nitrate-N, nitrite-N, orthophosphate-P, and sulfate. Samples being tested for nitrate/nitrite should be adjusted to pH < 2 with concentrated H2SO4 and refrigerated at 4 degrees C until analysis. Analyze samples being tested for bromide, chloride, fluoride, nitrate/nitrite, and sulfate within 28 days. Analyze samples being tested for nitrate-N, nitrite-N, and orthophosphate-P within 48 hours. Part B: Samples analyzed for bromate and chlorate may be held for 28 days without preservation. Chlorite should be analyzed for immediately (within 10 minutes). However, if the sample cannot be analyzed immediately, it may be preserved for up to 14 days if treated with ethylenediamine (ClO2 should be removed prior to this step) and chilled to 4oC.
Sample Volume250mL HDPE bottle
Collection MethodGrab sampling
InstrumentationIon Chromotography
Method Refernce300

Analyte List

AnalyteFormulaCAS Number
SulfateSO414808-79-8

* The typical detection limits and analytes are displayed for this particular method. Please contact Specialty Analytical if other analytes or detection limits are required in addition to the 200.8 Analyte List.

Request A Quote

If you would like us to provide a quote for laboratory analysis, just provide us with as much information as you can about your project (the more, the better) and we’ll provide you a quote via email. As you are searching or browsing our Analytical Guide, you’ll see the Request-A-Quote icon… just click on it to start the request process.